Fuel Oil
Residual and blended fuel oils for industrial heat: boilers, furnaces, kilns, dryers and the burners of asphalt hot-mix plants. Recovered off the Alang yard and processed at Mamsa, or sourced to grade.

Black Oils
Applications
Industrial Boilers and Furnaces
Steady, high-calorific fuel for boilers and furnaces that run around the clock.
Kilns and Dryers
Ceramics, textiles, chemicals and food processing units that fire kilns and dryers.
Hot-Mix Plants
Burner fuel for asphalt hot-mix plants on road projects.
Power Generation
Fuel for diesel engines and generating sets built for heavy fuel.
3 Grades
Grades, Specifications and Test Reports
Furnace Oil 180
Furnace oil up to 180 cSt at 50 °C, for boilers and furnaces with lighter burners.
- Kinematic Viscosity at 50 °C
- Max 180 cSt
- Flash Point (PMCC)
- 69 to 97 °C
- Gross Calorific Value
- 9 870 to 10 300 kcal/kg
Typical Properties: Furnace Oil 180
| Test | Method | Unit | Typical Range |
|---|---|---|---|
| Acidity, Inorganic | ASTM D 974 | mg KOH/g | Nil |
| Ash Content | IS 1448 (P:4) | % mass | 0.01 to 0.20 |
| Gross Calorific Value | IS 1448 (P:6) | kcal/kg | 9 870 to 10 300 |
| Density at 15 °C | IS 1448 (P:16) | kg/m³ | 961 to 1 065 |
| Flash Point (PMCC) | IS 1448 (P:21) | °C | 69 to 97 |
| Kinematic Viscosity at 50 °C | IS 1448 (P:25) | cSt | 100 to 160 |
| Sediment | IS 1448 (P:30) | % mass | 0.02 to 0.09 |
| Total Sulphur | ASTM D 4294 | % mass | 0.8 to 2.8 |
| Water Content | IS 1448 (P:40) | % vol | 0.1 to 0.3 |
Typical values for this grade. They vary within limits from batch to batch; the certificate for the actual lot accompanies every despatch.
Certificate of Analysis
Furnace Oil 180 · Typical Values
Furnace Oil 380
Residual fuel up to 380 cSt at 50 °C, to IS 1593 (MV2).
- Kinematic Viscosity at 50 °C
- Max 380 cSt
- Flash Point (PMCC)
- Min 60 °C
- Sulphur
- Max 4.0 % (3.5 % for Export)
Specification: IS 1593-1982 Furnace Oil, Grade MV2
| Test | Method | Unit | Limit |
|---|---|---|---|
| Relative Density at 15/15 °C | P: 16 or 32 | g/ml | To Be Reported |
| Water Content | P: 40 | % v | Max 1.0 |
| Flash Point (PMCC) | P: 21 | °C | Min 60 |
| Kinematic Viscosity at 50 °C | P: 25 | cSt | Max 380 |
| Sulphur | ASTM D 4294 | % w | Max 4.0 |
| Sulphur, for Export | IP 336 | % w | Max 3.5 |
| Acidity, Inorganic | P: 2 | mg KOH/g | Nil |
| Sediment by Extraction | P: 30 | % w | Max 0.25 |
| Ash | P: 4 | % w | Max 0.1 |
| Gross Calorific Value, Calculated | P: 7 | kcal/kg | To Be Reported |
- Fuel oil for marine users in diesel engines shall not exceed a density limit of 0.99.
- Where a specialised use needs low-sulphur fuel oil, a lower limit may be agreed between buyer and supplier.
- Conforms to BIS specification IS 1593-1982 for furnace oils, grade MV2. The export sulphur limit follows the tighter BPCL practice.
Results from a laboratory report published by Glorious Marinefuels for one lot. Every despatch carries the report for its own lot.
Certificate of Analysis
Furnace Oil 380 · Glorious Marinefuels Laboratory Report
Hot Mix Plant Fuel Oil
A light, free-flowing fuel oil for the burners of asphalt hot-mix plants.
- Kinematic Viscosity at 30 °C
- 2.5 to 15.7 cSt
- Flash Point
- 50 to 60 °C
- Total Sulphur
- Max 1.8 %
Typical Properties: Hot Mix Plant Fuel Oil
| Test | Unit | Specification | Typical |
|---|---|---|---|
| Specific Gravity at 30 °C | g/ml | 0.90 to 0.92 | 0.902 |
| Flash Point | °C | 50 to 60 | 52.5 |
| Kinematic Viscosity at 30 °C | cSt | 2.5 to 15.7 | 4.96 |
| Pour Point | °C | Max 12 | 1 |
| Ramsbottom Carbon Residue | % wt | Max 1.50 | 0.90 |
| Ash Content | % wt | Max 0.02 | 0.002 |
| Total Sulphur | % wt | Max 1.8 | 1.49 |
| Water Content | % vol | Max 0.25 | Nil |
| Gross Calorific Value | kcal/kg | 9 000 to 10 500 | 9 600 |
Typical values for this grade. They vary within limits from batch to batch; the certificate for the actual lot accompanies every despatch.
Certificate of Analysis
Hot Mix Plant Fuel Oil · Typical Values
Need a Rate on Fuel Oil?
By tanker, full loads within Gujarat and neighbouring states. A quantity and a delivery point get you a rate fastest.

